Color Coated roof sheets dealers

Product Range

Submit Query

captcha

Colour Coated Roofing Sheets

 Color Coated Roofing Sheets SuppliersWe are leading manufacturers, and suppliers of a comprehensive range of color coated roofing sheets. Advanced technical equipment is used by us for manufacturing these sheets. Color coated roofing sheets in various colors, sizes, heights, thickness and coatings are offered by us. They are also custom made depending on the requirements of the customer.
;Roofing sheets offer protection and ample amount of ventilation at lower costs. They are made using galvanized steel. The standard finished sheets offered by us are:

 

The standard finished sheets offered by us are:

  • Al-Zn Alloy Coated Steel (Bare Galvalume)
  • Pre Painted Galvanized Steel (PPGI)
  • Color Coated Al-Zn Alloy Coated Steel (Color Coated Galvalume)

Technical Specifications:

  • Tensile strength: 240 to 540 Mpa
  • Coil width: 1220mm
  • Thickness: 0.3mm to 0.8mm
  • Pitch: 200mm

Recommended Thickness:

  • Al-Zn alloy coated steel (550 Mpa)                                        : 0.47mm TCT
  • Pre Painted Galvanized (240 Mpa)                                        : 0.47-0.50mm TCT
  • Color Coated Al-Zn Alloy Coated Steel (550 Mpa)              : 0.47-0.50mm TCT

Features:

  • Colors and coatings of a wide range are available
  • Reliable and strong body
  • Corrosion resistant
  • High quality and low cost

 

Technial Specifications of Pre-Painted Galvanized Steel Sheet(PPGI)

Pre Painted Galvanized Steel Substrate : IS: 513 Cold Rolled Steel Coils.
Tensile Strength : 240 Mpa
Galvanizing : IS:277/JIS:3302
Zinc Coating : Pure Lead Free Zinc 120 GSM (both side mass).
Pre-Painting : IS: 14246/JIS:3312
Type of Coating : RMP/SMP
Total Coated Thickness(TCT) : 0.47 mm – 0.50 mm
Tolerance : +0.03 as per IS:513

 

Technical Specification of Aluminium Zinc Alloy Coated Steel Sheet

Aluminium Zinc Alloy Coated Steel Combination : 55% Aluminium 43.4% Zinc & 1.6% Silicon
Coating Std : ASI397 – 1993
Material : Bare Galvalume-ASTM A792M
Coating Mass : AZ 150
Base Metal : High Tensile Steel
Tensile Strength : 550 Mpa
Total Coated Thickness(TCT) : 0.47 mm – 0.50 mm
Tolerance : +0.04 As per AS/NZS 1397

 

Material

Colour Coated Galvalume sheet Material Yield  Strength Total Coated Thickness
PPGI 240 Mpa 0.47 – 0.50 mm
Bare Galvalume 550 Mpa 0.47 mm
Colour Coated Galvalume 550 Mpa 0.47 – 0.50 mm

 

Ietc Steel – RIB

 

Available Finishes

  • Pre Painted Galvanized Steel (PPGI)
  • Al-Zn Alloy Coated Steel (Bare Galvalume)
  • Colour Coated Al-Zn Alloy Coated Steel (Colour Coated Galvalume)

 

Recommended Roof Slope

After a comprehensive research, the Metal Building Manufacturers Association (MBMA) has suggested roof slope of about 1:10 as best matched and ideal for steel roofing sheets and we follow this standardization process. Our designers and technicians choose the appropriate slope, keeping in mind the factors like heat dissipation, energy conservation, environmental impacts and operational requirements..

 

 

Recommended Thickness

Pre Painted Galvanized (240 Mpa) : 0.47-0.50mm TCT
Al-Zn alloy coated steel (550 Mpa) : 0.47mm TCT
Colour Coated Al-Zn Alloy Coated Steel (550 Mpa) : 0.47-0.50mm TCT

 

Application

Used as Roofs and wall cladding in:
  • Factory buildings, warehouses and workshops
  • Garages
  • Institutions Laboratories
  • Spinning Mills
  • Large Spaces
  • Service centers
  • Car parking sheds
  • Super markets
  • Homes
  • Shops
  • Community halls
  • Auditoriums
  • Institutions
  • Parking Places
  • Textiles
  • Office buildings
  • Showrooms

roof cladding sheets suppliers